New Holland AG 57
Rolabar Rakes 57
PICK UP MORE OF YOUR VALUABLE HAY
Get a Quote
Request Brochure
Send to a Friend
Payment Calculator
Financing
Features
PTO-DRIVEN MODEL 57
Rake an 8-foot, 6-inch strip with the Model 57, which is PTO-driven. The main frame is made of 3-inch channel steel. A total of 90 tines, mounted on five tine bars, follow ground contours closely to get every bit of hay. Tine bar bearings can be replaced quickly, without removing the tine bar from the rake.
Specifications
| 57 | |
| Specifications | |
| Raking width ft. in. (mm) | 8'6" (2591 mm) |
| Width overall ft. in. (mm) | 10'3" (3124 mm) |
| Height overall ft. in. (mm) | 3'4" (1016 mm) |
| Length overall ft. in. (mm) | 6'5" (1956 mm) |
| Wheel Tread ft. in. (mm) | 5'5" (1651 mm) |
| Transport Speed mph (km/h) | Tractor Speed |
| Operating Speed mph (km/h) | 2 to 8 mph (3 to 13) |
| Weight, approx. lbs. (kg) | 777 lbs. (352 kg) |
| Main frame in. (mm) | 3" (76 mm) channel, cross-braced with heavy tubular members |
| Basket | - |
| Basket drive | 540 PTO |
| Gearbox (ground drive) | None |
| Drive Housing | Special accuracy shaft running on tapered roller bearings |
| Tine bars | 5, standard high carbon |
| Tines | Steel or rubber-mounted (only rubber-mounted available on hydraulic models) |
| Number of tines | 90 |
| Tine Bar Bearings | Single ball bearing |
| Drive | PTO |
| Delivery | Left-hand |
| Tractor requirement hp | 30 |
| Hitch type | 3-Point |
| Standard safety equipment | Reflective strips front & rear |
NEED A QUOTE?
Then let us get that for you
Fields with asterisks* are required.