|All Land Pride Rotary Cutters have been designed and tested and meet rigorous
voluntary testing procedures.
||Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
|5 Year gearbox warranty
||Shows confidence in gearbox integrity.
|160 HP Divider gearbox
and 110 HP wing gearboxes
|A rugged heavy built gearboxes capable of handling heavy cutting applications.
|Gearbox seal protection
||Gearbox bottom seal protection for longer bearing life.
|Smooth Top Design
||Allows for easy cleaning of deck.
|Low tongue weight
||Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
|Narrow tongue construction
||Allows for a tighter turning radius.
Cat. 6 CV or Cat. 5 Conventional
|Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
|Cat. 5 intermediate & Cat. 4 wing
drivelines with slip-clutches
|Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load
instead of twisting the driveline.
||Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.
|High Blade tip speed
15,000 FPM Wing RC3615
15,268 FPM Center RC3615
14,620 FPM Wing RCM3615
15,578 FPM Center RCM3615
|Allows clean cutting of material.
|6" Blade overlap
||Eliminates skipping during turns.
|Left wing rotates clockwise
||Better discharge of material. Picks up tractor tracks.
|3/16" Round stump jumper
||Standard thick stump jumper material keeps damage to a minimum.
|1/4" Sidewall thickness
||Increased thickness reduces damage from objects being thrown into deck sidewalls.
||Reduces drawbar wear by keeping hitch level while going through ditches.
|Hinged wing sections
||Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
|1" Solid hinge rods
||Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in
the hinge area itself.
|Wing transport locks
||Wing transport locks securely hold the wings in the folded position in case of hydraulic
|Enclosed front to rear dual
|Dual leveling rods enable the cutter to pull equally on the rear axle during travel over
||5-Bolt hubs makes the wheel assembly more durable and longer lasting.
|Spring cushioned center-axle
||Protects unit from bumps and ground shock.
|Replaceable wheel spindles
||Wheel spindles can be replaced when damaged without replacing entire axle
||Laminated tires: Eliminates flats.
Airplane tires without foam filling: Give better cushion while transporting.
Airplane tires with foam filling: Give better cushion while transporting and can’t go
|Double swivel hitch option
||Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
|Bar-tite hitch option
||Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.